THE GREEK KITCHEN
SCORE: 14 POINTSTuesday, January 11, 2022
Violations Cited
04L
Evidence of Mice Present in Facility
Evidence of mice or live mice present in facility's food and/or non-food areas.
WIDESPREAD CONTAMINATION: Mice produce 50-75 droppings daily, each containing Salmonella, Hantavirus. One mouse contaminates 10x more food than it eats through droppings and urine. Mouse allergens trigger asthma. Can infest entire facility in weeks.
Eliminate immediately: Clean all droppings with bleach solution, Seal ALL holes over 1/4 inch, Remove nesting materials, Professional treatment if >10 droppings found, Discard contaminated foods, Install traps/bait stations, Deep clean entire facility.
02B
Hot TCS Food Not Held at 140°F or Above
Hot food item not held at or above 140º F.
BACTERIAL MULTIPLICATION: At 120°F, Clostridium perfringens doubles every 10 minutes. Can reach illness-causing levels within 1 hour. This bacteria causes 1 million US cases annually with severe abdominal cramps and diarrhea lasting 24 hours. Hot holding violations responsible for 40% of restaurant outbreaks.
Maintain ALL hot foods at 140°F minimum. Check temperatures every 30 minutes for problem foods, every 2 hours otherwise. Use calibrated thermometers. Adjust equipment immediately if below 140°F. Reheat to 165°F if below temp for under 2 hours. DISCARD if below 140°F for over 2 hours.
10F
Non-food Contact Surfaces Not Clean
Non-food contact surface improperly constructed. Unacceptable material used. Non-food contact surface or equipment improperly maintained and/or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
INDIRECT CONTAMINATION: Dirty non-food surfaces harbor pests and bacteria. Employees touch these surfaces then food. Accumulation attracts roaches and rodents. Creates reservoir of contamination that spreads throughout facility.
Clean all non-food surfaces regularly: Walls, ceilings, floors daily in food areas, Equipment exteriors, Storage shelves, Light fixtures monthly. Seal cracks. Repair damaged surfaces. Maintain cleaning schedule. Assign responsibilities.
Violations were cited in the following area(s).