MALA PROJECT
SCORE: 33 POINTSTuesday, April 19, 2022
MALA PROJECT in East Village underwent a NYC health inspection on April 19, 2022 and scored 33 points. The inspection found 6 violations, including 6 critical.
Violations Cited
02B
Hot TCS Food Not Held at 140°F or Above
Hot food item not held at or above 140º F.
BACTERIAL MULTIPLICATION: At 120°F, Clostridium perfringens doubles every 10 minutes. Can reach illness-causing levels within 1 hour. This bacteria causes 1 million US cases annually with severe abdominal cramps and diarrhea lasting 24 hours. Hot holding violations responsible for 40% of restaurant outbreaks.
Maintain ALL hot foods at 140°F minimum. Check temperatures every 30 minutes for problem foods, every 2 hours otherwise. Use calibrated thermometers. Adjust equipment immediately if below 140°F. Reheat to 165°F if below temp for under 2 hours. DISCARD if below 140°F for over 2 hours.
04L
Evidence of Mice Present in Facility
Evidence of mice or live mice present in facility's food and/or non-food areas.
WIDESPREAD CONTAMINATION: Mice produce 50-75 droppings daily, each containing Salmonella, Hantavirus. One mouse contaminates 10x more food than it eats through droppings and urine. Mouse allergens trigger asthma. Can infest entire facility in weeks.
Eliminate immediately: Clean all droppings with bleach solution, Seal ALL holes over 1/4 inch, Remove nesting materials, Professional treatment if >10 droppings found, Discard contaminated foods, Install traps/bait stations, Deep clean entire facility.
04H
Food Contaminated or Cross-Contaminated
Raw, cooked or prepared food is adulterated, contaminated, cross-contaminated, or not discarded in accordance with HACCP plan.
PATHOGEN SPREAD: Cross-contamination spreads deadly bacteria throughout facility. One contaminated cutting board can transfer Salmonella to 20+ food items. Causes multi-victim outbreaks. E. coli O157:H7 from raw beef can cause kidney failure in children.
Prevent ALL cross-contamination: Separate equipment for raw and ready-to-eat, Color-coded cutting boards, Proper storage order (raw below ready-to-eat), Clean and sanitize between different foods, Cover all foods, Change gloves between tasks.
10B
Plumbing Not Properly Installed or Maintained
Plumbing not properly installed or maintained; anti-siphonage or backflow prevention device not provided where required; equipment or floor not properly drained; sewage disposal system in disrepair or not functioning properly.
WATER CONTAMINATION: Backflow can siphon sewage into water supply, contaminating entire facility. Cross-connections spread pathogens throughout plumbing. Sewage backups create immediate health hazard. Can affect hundreds through contaminated water.
Install backflow preventers on ALL required fixtures. Maintain air gaps (2x pipe diameter minimum). Fix all leaks immediately. Ensure proper drainage - no standing water. Regular plumbing inspection. No direct connections between sewage and water supply.
10F
Non-food Contact Surfaces Not Clean
Non-food contact surface improperly constructed. Unacceptable material used. Non-food contact surface or equipment improperly maintained and/or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
INDIRECT CONTAMINATION: Dirty non-food surfaces harbor pests and bacteria. Employees touch these surfaces then food. Accumulation attracts roaches and rodents. Creates reservoir of contamination that spreads throughout facility.
Clean all non-food surfaces regularly: Walls, ceilings, floors daily in food areas, Equipment exteriors, Storage shelves, Light fixtures monthly. Seal cracks. Repair damaged surfaces. Maintain cleaning schedule. Assign responsibilities.
08A
Facility Not Free from Harborage Conditions
Facility not vermin proof. Harborage or conditions conducive to attracting vermin to the premises and/or allowing vermin to exist.
PEST ATTRACTION: Harborage conditions support pest infestations. Gaps allow entry of rodents carrying 35+ diseases. Standing water breeds flies that spread 100+ pathogens. Clutter provides nesting for pests. Creates ongoing contamination risk.
Eliminate ALL harborage conditions: Seal cracks/holes (1/4 inch for mice, 1/2 inch for rats), Fix leaking pipes, Remove clutter/unused equipment, Eliminate standing water, Clean grease accumulation, Maintain 6 inches clearance from walls, Remove cardboard storage.
Violations were cited in the following area(s).
MALA PROJECT — Inspection Questions
- Did MALA PROJECT pass their NYC health inspection on April 19, 2022?
- MALA PROJECT underwent inspection on April 19, 2022 with a score of 33 points. The inspection found 6 violation(s).
- What critical violations did MALA PROJECT have?
- MALA PROJECT had 6 critical violation(s) during their inspection. Critical violations directly contribute to foodborne illness and must be corrected immediately. These include issues with temperature control, hand washing, cross-contamination, and pest infestations.
- What does violation code 02B mean in NYC restaurant inspections?
- NYC violation 02B (Hot TCS Food Not Held at 140°F or Above) is a critical violation. Hot potentially hazardous foods must be maintained at 140°F or above to prevent rapid bacterial growth in the danger zone (41-140°F). BACTERIAL MULTIPLICATION: At 120°F, Clostridium perfringens doubles every 10 minutes. Can reach illness-causing levels within 1 hour. This bacteria causes 1 million US cases annually with severe abdominal cramps and diarrhea lasting 24 hours. Hot holding violations responsible for 40% of restaurant outbreaks.
- What does violation code 04L mean in NYC restaurant inspections?
- NYC violation 04L (Evidence of Mice Present in Facility) is a critical violation. Mouse droppings, gnaw marks, nesting materials, or live mice observed. WIDESPREAD CONTAMINATION: Mice produce 50-75 droppings daily, each containing Salmonella, Hantavirus. One mouse contaminates 10x more food than it eats through droppings and urine. Mouse allergens trigger asthma. Can infest entire facility in weeks.
- What does violation code 04H mean in NYC restaurant inspections?
- NYC violation 04H (Food Contaminated or Cross-Contaminated) is a critical violation. Raw, cooked or prepared food is adulterated, contaminated, or cross-contaminated during storage, preparation, or service. PATHOGEN SPREAD: Cross-contamination spreads deadly bacteria throughout facility. One contaminated cutting board can transfer Salmonella to 20+ food items. Causes multi-victim outbreaks. E. coli O157:H7 from raw beef can cause kidney failure in children.
- What does violation code 10B mean in NYC restaurant inspections?
- NYC violation 10B (Plumbing Not Properly Installed or Maintained) is a major violation. Anti-siphonage or back-flow prevention device not provided. Sewage disposal system in disrepair. WATER CONTAMINATION: Backflow can siphon sewage into water supply, contaminating entire facility. Cross-connections spread pathogens throughout plumbing. Sewage backups create immediate health hazard. Can affect hundreds through contaminated water.
- What does violation code 10F mean in NYC restaurant inspections?
- NYC violation 10F (Non-food Contact Surfaces Not Clean) is a minor violation. Non-food contact surfaces or equipment not kept clean, not properly sealed, or not properly maintained. INDIRECT CONTAMINATION: Dirty non-food surfaces harbor pests and bacteria. Employees touch these surfaces then food. Accumulation attracts roaches and rodents. Creates reservoir of contamination that spreads throughout facility.
- What does violation code 08A mean in NYC restaurant inspections?
- NYC violation 08A (Facility Not Free from Harborage Conditions) is a major violation. Conditions exist that attract or allow pests to harbor in establishment. PEST ATTRACTION: Harborage conditions support pest infestations. Gaps allow entry of rodents carrying 35+ diseases. Standing water breeds flies that spread 100+ pathogens. Clutter provides nesting for pests. Creates ongoing contamination risk.