LU PEKING HOUSE
GRADE AWednesday, February 5, 2025
Violations Cited
02H
Food Not Cooled by Approved Method
After cooking or removal from hot holding, TCS food not cooled by an approved method whereby the internal temperature is reduced from 140 °F to 70 °F or less within 2 hours, and from 70 °F to 41 °F or less within 4 additional hours.
TOXIN PRODUCTION: Slow cooling is the #1 cause of foodborne outbreaks. Clostridium perfringens spores survive cooking and germinate during slow cooling, producing heat-stable toxin. Causes 'buffet illness' affecting hundreds at events. Staph aureus produces toxin that CANNOT be destroyed by reheating.
Cool using approved methods: Shallow pans (2 inches max depth), Ice baths with frequent stirring, Ice paddles, Blast chillers, Cut large items into portions. NEVER cool at room temperature. NEVER stack hot containers. Document cooling times and temperatures.
08B
NYC Health Code Violation 08B
Garbage receptacle not pest or water resistant, with tight-fitting lids, and covered except while in active use. Garbage receptacle and cover not cleaned after emptying and prior to reuse. Garbage, refuse and other solid and liquid waste not collected, stored, removed and disposed of so as to prevent a nuisance.
HEALTH HAZARD: This critical violation creates immediate risk of foodborne illness. Studies link NYC Health Code Violation 08B to bacterial contamination and outbreak events. Must be corrected immediately to protect public health.
Follow NYC Health Code Article 81 requirements. Implement corrective action immediately. Document all corrections. Train staff on proper procedures. Schedule follow-up inspection if critical.
10H
Sanitization not provided for utensil washing
Single service article not provided. Single service article reused or not protected from contamination when transported, stored, dispensed. Drinking straws not completely enclosed in wrapper or dispensed from a sanitary device.
Unsanitized utensils transfer bacteria directly to customers' food and mouths
Use approved sanitizer at correct concentration; test strips required; proper contact time
10F
Non-food Contact Surfaces Not Clean
Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
INDIRECT CONTAMINATION: Dirty non-food surfaces harbor pests and bacteria. Employees touch these surfaces then food. Accumulation attracts roaches and rodents. Creates reservoir of contamination that spreads throughout facility.
Clean all non-food surfaces regularly: Walls, ceilings, floors daily in food areas, Equipment exteriors, Storage shelves, Light fixtures monthly. Seal cracks. Repair damaged surfaces. Maintain cleaning schedule. Assign responsibilities.
Violations were cited in the following area(s).