GOLDEN STEAMER ON 8
SCORE: 24 POINTSMonday, March 25, 2024
GOLDEN STEAMER ON 8 in Sunset Park (Central) underwent a NYC health inspection on March 25, 2024 and scored 24 points. The inspection found 7 violations, including 7 critical.
Violations Cited
10F
Non-food Contact Surfaces Not Clean
Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
INDIRECT CONTAMINATION: Dirty non-food surfaces harbor pests and bacteria. Employees touch these surfaces then food. Accumulation attracts roaches and rodents. Creates reservoir of contamination that spreads throughout facility.
Clean all non-food surfaces regularly: Walls, ceilings, floors daily in food areas, Equipment exteriors, Storage shelves, Light fixtures monthly. Seal cracks. Repair damaged surfaces. Maintain cleaning schedule. Assign responsibilities.
06A
Personal cleanliness inadequate
Personal cleanliness is inadequate. Outer garment soiled with possible contaminant. Effective hair restraint not worn where required. Jewelry worn on hands or arms. Fingernail polish worn or fingernails not kept clean and trimmed.
Poor hygiene transfers pathogens; contaminated clothing spreads bacteria throughout facility
Clean outer garments; hair restraints; no jewelry; short, clean fingernails; no nail polish
06C
Food not protected from contamination
Food, supplies, or equipment not protected from potential source of contamination during storage, preparation, transportation, display, service or from customer’s refillable, reusable container. Condiments not in single-service containers or dispensed directly by the vendor.
Unprotected food exposed to bacteria, viruses, chemicals, and physical contaminants
Cover all food; store 6 inches off floor; protect from customer contamination; use sneeze guards
09C
Food contact surface improperly constructed
Design, construction, materials used or maintenance of food contact surface improper. Surface not easily cleanable, sanitized and maintained.
Improper surfaces harbor bacteria in cracks and cannot be properly sanitized
Use stainless steel, approved plastics; no wood except cutting boards; smooth, intact surfaces
10B
Plumbing Not Properly Installed or Maintained
Anti-siphonage or back-flow prevention device not provided where required; equipment or floor not properly drained; sewage disposal system in disrepair or not functioning properly. Condensation or liquid waste improperly disposed of.
WATER CONTAMINATION: Backflow can siphon sewage into water supply, contaminating entire facility. Cross-connections spread pathogens throughout plumbing. Sewage backups create immediate health hazard. Can affect hundreds through contaminated water.
Install backflow preventers on ALL required fixtures. Maintain air gaps (2x pipe diameter minimum). Fix all leaks immediately. Ensure proper drainage - no standing water. Regular plumbing inspection. No direct connections between sewage and water supply.
06D
Food Contact Surfaces Not Properly Sanitized
Food contact surface not properly washed, rinsed and sanitized after each use and following any activity when contamination may have occurred.
BACTERIAL BUILDUP: Unsanitized surfaces harbor millions of bacteria within hours. Cross-contamination affects all food prepared on surface. Major cause of multi-victim outbreaks. Cutting boards can contain 200x more bacteria than toilet seats.
Clean and sanitize ALL food contact surfaces: After each use, Between different food types, Every 4 hours in continuous use, When contaminated. Use proper concentration sanitizer (50-100ppm chlorine, 200-400ppm quat). Air dry. Test sanitizer every 2 hours.
10H
Sanitization not provided for utensil washing
Single service article not provided. Single service article reused or not protected from contamination when transported, stored, dispensed. Drinking straws not completely enclosed in wrapper or dispensed from a sanitary device.
Unsanitized utensils transfer bacteria directly to customers' food and mouths
Use approved sanitizer at correct concentration; test strips required; proper contact time
Violations were cited in the following area(s).
GOLDEN STEAMER ON 8 — Inspection Questions
- Did GOLDEN STEAMER ON 8 pass their NYC health inspection on March 25, 2024?
- GOLDEN STEAMER ON 8 underwent inspection on March 25, 2024 with a score of 24 points. The inspection found 7 violation(s).
- What critical violations did GOLDEN STEAMER ON 8 have?
- GOLDEN STEAMER ON 8 had 7 critical violation(s) during their inspection. Critical violations directly contribute to foodborne illness and must be corrected immediately. These include issues with temperature control, hand washing, cross-contamination, and pest infestations.
- What does violation code 10F mean in NYC restaurant inspections?
- NYC violation 10F (Non-food Contact Surfaces Not Clean) is a minor violation. Non-food contact surfaces or equipment not kept clean, not properly sealed, or not properly maintained. INDIRECT CONTAMINATION: Dirty non-food surfaces harbor pests and bacteria. Employees touch these surfaces then food. Accumulation attracts roaches and rodents. Creates reservoir of contamination that spreads throughout facility.
- What does violation code 06A mean in NYC restaurant inspections?
- NYC violation 06A (Personal cleanliness inadequate) is a critical violation. Food workers must maintain high standards of personal cleanliness Poor hygiene transfers pathogens; contaminated clothing spreads bacteria throughout facility
- What does violation code 06C mean in NYC restaurant inspections?
- NYC violation 06C (Food not protected from contamination) is a critical violation. All food must be protected from contamination during storage, prep, display and service Unprotected food exposed to bacteria, viruses, chemicals, and physical contaminants
- What does violation code 09C mean in NYC restaurant inspections?
- NYC violation 09C (Food contact surface improperly constructed) is a major violation. Food contact surfaces must be smooth, non-porous, and easily cleanable Improper surfaces harbor bacteria in cracks and cannot be properly sanitized
- What does violation code 10B mean in NYC restaurant inspections?
- NYC violation 10B (Plumbing Not Properly Installed or Maintained) is a major violation. Anti-siphonage or back-flow prevention device not provided. Sewage disposal system in disrepair. WATER CONTAMINATION: Backflow can siphon sewage into water supply, contaminating entire facility. Cross-connections spread pathogens throughout plumbing. Sewage backups create immediate health hazard. Can affect hundreds through contaminated water.
- What does violation code 06D mean in NYC restaurant inspections?
- NYC violation 06D (Food Contact Surfaces Not Properly Sanitized) is a critical violation. Food contact surfaces not washed, rinsed, and sanitized after each use and following contamination. BACTERIAL BUILDUP: Unsanitized surfaces harbor millions of bacteria within hours. Cross-contamination affects all food prepared on surface. Major cause of multi-victim outbreaks. Cutting boards can contain 200x more bacteria than toilet seats.
- What does violation code 10H mean in NYC restaurant inspections?
- NYC violation 10H (Sanitization not provided for utensil washing) is a major violation. Utensils must be properly sanitized after washing to kill remaining bacteria Unsanitized utensils transfer bacteria directly to customers' food and mouths