EL MOLCAJETE RESTAURANT.
SCORE: 28 POINTSMonday, May 20, 2024
Violations Cited
10B
Plumbing Not Properly Installed or Maintained
Anti-siphonage or back-flow prevention device not provided where required; equipment or floor not properly drained; sewage disposal system in disrepair or not functioning properly. Condensation or liquid waste improperly disposed of.
WATER CONTAMINATION: Backflow can siphon sewage into water supply, contaminating entire facility. Cross-connections spread pathogens throughout plumbing. Sewage backups create immediate health hazard. Can affect hundreds through contaminated water.
Install backflow preventers on ALL required fixtures. Maintain air gaps (2x pipe diameter minimum). Fix all leaks immediately. Ensure proper drainage - no standing water. Regular plumbing inspection. No direct connections between sewage and water supply.
06C
Food not protected from contamination
Food, supplies, or equipment not protected from potential source of contamination during storage, preparation, transportation, display, service or from customer’s refillable, reusable container. Condiments not in single-service containers or dispensed directly by the vendor.
Unprotected food exposed to bacteria, viruses, chemicals, and physical contaminants
Cover all food; store 6 inches off floor; protect from customer contamination; use sneeze guards
06F
Wiping Cloths Not Stored in Sanitizer
Wiping cloths not stored clean and dry, or in a sanitizing solution, between uses.
CONTAMINATION SPREAD: Dirty wiping cloths spread millions of bacteria across every surface wiped. Bacteria double every 20 minutes on damp cloths. One contaminated cloth can spread pathogens to 30+ surfaces, causing facility-wide contamination.
Store wiping cloths in sanitizer AT ALL TIMES between uses: 50-100ppm chlorine or 200-400ppm quaternary ammonium. Change solution when visibly dirty or every 4 hours. Use separate cloths for food contact vs non-food contact. Test sanitizer concentration every 2 hours.
02H
Food Not Cooled by Approved Method
After cooking or removal from hot holding, TCS food not cooled by an approved method whereby the internal temperature is reduced from 140 °F to 70 °F or less within 2 hours, and from 70 °F to 41 °F or less within 4 additional hours.
TOXIN PRODUCTION: Slow cooling is the #1 cause of foodborne outbreaks. Clostridium perfringens spores survive cooking and germinate during slow cooling, producing heat-stable toxin. Causes 'buffet illness' affecting hundreds at events. Staph aureus produces toxin that CANNOT be destroyed by reheating.
Cool using approved methods: Shallow pans (2 inches max depth), Ice baths with frequent stirring, Ice paddles, Blast chillers, Cut large items into portions. NEVER cool at room temperature. NEVER stack hot containers. Document cooling times and temperatures.
04C
Bare Hand Contact with Ready-to-Eat Food
Food worker/food vendor does not use utensil or other barrier to eliminate bare hand contact with food that will not receive adequate additional heat treatment.
DIRECT CONTAMINATION: Hands carry 150+ bacterial species and 3,000-5,000 bacteria per square centimeter. Even 'clean' hands transfer millions of bacteria. Ready-to-eat foods receive no kill step. Bare hand contact is #1 factor in Norovirus outbreaks affecting 20 million Americans annually.
NO bare hand contact EVER with ready-to-eat foods. Use: Single-use gloves (change every hour and between tasks), Tongs/spatulas/spoons, Deli tissue/wax paper. Wash hands before donning gloves. Post signs. This is NON-NEGOTIABLE in NYC.
10F
Non-food Contact Surfaces Not Clean
Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
INDIRECT CONTAMINATION: Dirty non-food surfaces harbor pests and bacteria. Employees touch these surfaces then food. Accumulation attracts roaches and rodents. Creates reservoir of contamination that spreads throughout facility.
Clean all non-food surfaces regularly: Walls, ceilings, floors daily in food areas, Equipment exteriors, Storage shelves, Light fixtures monthly. Seal cracks. Repair damaged surfaces. Maintain cleaning schedule. Assign responsibilities.
Violations were cited in the following area(s).