RETHINK FOOD @ CHEFSCAPE
SCORE: 37 POINTSFriday, December 5, 2025
RETHINK FOOD @ CHEFSCAPE in Greenwich Village underwent a NYC health inspection on December 5, 2025 and scored 37 points. The inspection found 8 violations, including 8 critical.
Violations Cited
06F
Wiping Cloths Not Stored in Sanitizer
Wiping cloths not stored clean and dry, or in a sanitizing solution, between uses.
CONTAMINATION SPREAD: Dirty wiping cloths spread millions of bacteria across every surface wiped. Bacteria double every 20 minutes on damp cloths. One contaminated cloth can spread pathogens to 30+ surfaces, causing facility-wide contamination.
Store wiping cloths in sanitizer AT ALL TIMES between uses: 50-100ppm chlorine or 200-400ppm quaternary ammonium. Change solution when visibly dirty or every 4 hours. Use separate cloths for food contact vs non-food contact. Test sanitizer concentration every 2 hours.
06E
NYC Health Code Violation 06E
Sanitized equipment or utensil, including in-use food dispensing utensil, improperly used or stored.
HEALTH HAZARD: This critical violation creates immediate risk of foodborne illness. Studies link NYC Health Code Violation 06E to bacterial contamination and outbreak events. Must be corrected immediately to protect public health.
Follow NYC Health Code Article 81 requirements. Implement corrective action immediately. Document all corrections. Train staff on proper procedures. Schedule follow-up inspection if critical.
02H
Food Not Cooled by Approved Method
After cooking or removal from hot holding, TCS food not cooled by an approved method whereby the internal temperature is reduced from 140 °F to 70 °F or less within 2 hours, and from 70 °F to 41 °F or less within 4 additional hours.
TOXIN PRODUCTION: Slow cooling is the #1 cause of foodborne outbreaks. Clostridium perfringens spores survive cooking and germinate during slow cooling, producing heat-stable toxin. Causes 'buffet illness' affecting hundreds at events. Staph aureus produces toxin that CANNOT be destroyed by reheating.
Cool using approved methods: Shallow pans (2 inches max depth), Ice baths with frequent stirring, Ice paddles, Blast chillers, Cut large items into portions. NEVER cool at room temperature. NEVER stack hot containers. Document cooling times and temperatures.
10F
Non-food Contact Surfaces Not Clean
Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
INDIRECT CONTAMINATION: Dirty non-food surfaces harbor pests and bacteria. Employees touch these surfaces then food. Accumulation attracts roaches and rodents. Creates reservoir of contamination that spreads throughout facility.
Clean all non-food surfaces regularly: Walls, ceilings, floors daily in food areas, Equipment exteriors, Storage shelves, Light fixtures monthly. Seal cracks. Repair damaged surfaces. Maintain cleaning schedule. Assign responsibilities.
28-01
Nuisance created or allowed to exist. Facility not free from unsafe, hazardous, offensive or annoying condition.
Nuisance created or allowed to exist. Facility not free from unsafe, hazardous, offensive or annoying condition.
HEALTH HAZARD: This critical violation creates immediate risk of foodborne illness. Studies link Nuisance created or allowed to exist. Fa to bacterial contamination and outbreak events. Must be corrected immediately to protect public health.
Follow NYC Health Code Article 81 requirements. Implement corrective action immediately. Document all corrections. Train staff on proper procedures. Schedule follow-up inspection if critical.
09C
Food contact surface improperly constructed
Design, construction, materials used or maintenance of food contact surface improper. Surface not easily cleanable, sanitized and maintained.
Improper surfaces harbor bacteria in cracks and cannot be properly sanitized
Use stainless steel, approved plastics; no wood except cutting boards; smooth, intact surfaces
10G
Dishwashing facilities inadequate
Dishwashing and ware washing: Cleaning and sanitizing of tableware, including dishes, utensils, and equipment deficient.
Inadequate dishwashing spreads bacteria across all utensils and tableware
Three-compartment sink or approved dishwasher; proper wash, rinse, sanitize procedures
10B
Plumbing Not Properly Installed or Maintained
Anti-siphonage or back-flow prevention device not provided where required; equipment or floor not properly drained; sewage disposal system in disrepair or not functioning properly. Condensation or liquid waste improperly disposed of.
WATER CONTAMINATION: Backflow can siphon sewage into water supply, contaminating entire facility. Cross-connections spread pathogens throughout plumbing. Sewage backups create immediate health hazard. Can affect hundreds through contaminated water.
Install backflow preventers on ALL required fixtures. Maintain air gaps (2x pipe diameter minimum). Fix all leaks immediately. Ensure proper drainage - no standing water. Regular plumbing inspection. No direct connections between sewage and water supply.
Violations were cited in the following area(s).
RETHINK FOOD @ CHEFSCAPE — Inspection Questions
- Did RETHINK FOOD @ CHEFSCAPE pass their NYC health inspection on December 5, 2025?
- RETHINK FOOD @ CHEFSCAPE underwent inspection on December 5, 2025 with a score of 37 points. The inspection found 8 violation(s).
- What critical violations did RETHINK FOOD @ CHEFSCAPE have?
- RETHINK FOOD @ CHEFSCAPE had 8 critical violation(s) during their inspection. Critical violations directly contribute to foodborne illness and must be corrected immediately. These include issues with temperature control, hand washing, cross-contamination, and pest infestations.
- What does violation code 06F mean in NYC restaurant inspections?
- NYC violation 06F (Wiping Cloths Not Stored in Sanitizer) is a critical violation. Wiping cloths used on food contact surfaces not stored in sanitizing solution between uses. CONTAMINATION SPREAD: Dirty wiping cloths spread millions of bacteria across every surface wiped. Bacteria double every 20 minutes on damp cloths. One contaminated cloth can spread pathogens to 30+ surfaces, causing facility-wide contamination.
- What does violation code 06E mean in NYC restaurant inspections?
- NYC violation 06E (NYC Health Code Violation 06E) is a critical violation. Violation of NYC Health Code requirements HEALTH HAZARD: This critical violation creates immediate risk of foodborne illness. Studies link NYC Health Code Violation 06E to bacterial contamination and outbreak events. Must be corrected immediately to protect public health.
- What does violation code 02H mean in NYC restaurant inspections?
- NYC violation 02H (Food Not Cooled by Approved Method) is a critical violation. Cooked foods must be rapidly cooled from 140°F to 70°F within 2 hours, then to 41°F within 4 additional hours. TOXIN PRODUCTION: Slow cooling is the #1 cause of foodborne outbreaks. Clostridium perfringens spores survive cooking and germinate during slow cooling, producing heat-stable toxin. Causes 'buffet illness' affecting hundreds at events. Staph aureus produces toxin that CANNOT be destroyed by reheating.
- What does violation code 10F mean in NYC restaurant inspections?
- NYC violation 10F (Non-food Contact Surfaces Not Clean) is a minor violation. Non-food contact surfaces or equipment not kept clean, not properly sealed, or not properly maintained. INDIRECT CONTAMINATION: Dirty non-food surfaces harbor pests and bacteria. Employees touch these surfaces then food. Accumulation attracts roaches and rodents. Creates reservoir of contamination that spreads throughout facility.
- What does violation code 28-01 mean in NYC restaurant inspections?
- NYC violation 28-01 (Nuisance created or allowed to exist. Facility not free from unsafe, hazardous, offensive or annoying condition.) is a critical violation. Nuisance created or allowed to exist. Facility not free from unsafe, hazardous, offensive or annoying condition. HEALTH HAZARD: This critical violation creates immediate risk of foodborne illness. Studies link Nuisance created or allowed to exist. Fa to bacterial contamination and outbreak events. Must be corrected immediately to protect public health.
- What does violation code 09C mean in NYC restaurant inspections?
- NYC violation 09C (Food contact surface improperly constructed) is a major violation. Food contact surfaces must be smooth, non-porous, and easily cleanable Improper surfaces harbor bacteria in cracks and cannot be properly sanitized
- What does violation code 10G mean in NYC restaurant inspections?
- NYC violation 10G (Dishwashing facilities inadequate) is a major violation. Proper warewashing facilities and procedures required to sanitize equipment Inadequate dishwashing spreads bacteria across all utensils and tableware
- What does violation code 10B mean in NYC restaurant inspections?
- NYC violation 10B (Plumbing Not Properly Installed or Maintained) is a major violation. Anti-siphonage or back-flow prevention device not provided. Sewage disposal system in disrepair. WATER CONTAMINATION: Backflow can siphon sewage into water supply, contaminating entire facility. Cross-connections spread pathogens throughout plumbing. Sewage backups create immediate health hazard. Can affect hundreds through contaminated water.